音量指示器
[09-14 01:04:12] 来源:http://www.88dzw.com 电子制作 阅读:8209次
文章摘要:Construction1) The stripboard layout was designed for a Hammond 1591B plastic box with space in the lower end for a rechargeable 9V battery. One bolt holds the circuit board and a second bolt was cut short as a guide.2) A second piece of stripboard was used on a diagonal to space the LEDs closely to
音量指示器,标签:电子小制作,http://www.88dzw.comConstruction
1) The stripboard layout was designed for a Hammond 1591B plastic box with space in the lower end for a rechargeable 9V battery. One bolt holds the circuit board and a second bolt was cut short as a guide.
2) A second piece of stripboard was used on a diagonal to space the LEDs closely together. A few LEDs needed their rim to be filed slightly to fit.
3) A third piece of stripboard was used as a separating wall for the battery and it interlocks with the LEDs stripboard to hold it in place.
4) 11-wire flexible ribbon cable connects to the LEDs.
5) Use shielded audio from the microphone and a rubber grommet holding it.
Tag:电子制作,电子小制作,维修教程知识 - 电子制作
- 上一篇:电磁炉工作原理详细介绍
编辑推荐
最新更新
- · 自制教室照明节电控制器
- · 双色音乐彩灯的制作
- · 三相交流电机缺相保护器
- · 声光控节能灯的制作
- · 同线电话转呼及互通器电路
- · 超低频信号发生器的制作
- · 自制热转印电路板
- · 警笛发声生器电路
- · 一款节能电路
- · 利用太阳能充电的旅行充电器
热门排行