What is UATA?
[09-12 11:27:46] 来源:http://www.88dzw.com 电路基础 阅读:8813次
文章摘要:What is UATA?In computers, Ultra Advanced Technology Attachment (UATA) is a term used to describe a type of hard disk drive (HDD). HDDs are a non-volatile way of storing digitally encoded data. Non-volatile means that the data remains on the HDD even when it is powered down, although the data can on
What is UATA?,标签:电子电路基础,模拟电路基础,http://www.88dzw.comWhat is UATA?
In computers, Ultra Advanced Technology Attachment (UATA) is a term used to describe a type of hard disk drive (HDD). HDDs are a non-volatile way of storing digitally encoded data. Non-volatile means that the data remains on the HDD even when it is powered down, although the data can only be retrieved when the HDD has power. By contrast, a computer chip that stores digital information that is volatile loses that information when the device that it is housed within is powered down. Advanced Technology Attachment is a general class of HDDs and Ultra distinguishes a more specific type of HDD from that general class.
UATA and ATA HDDs are more commonly referred to as Integrated Drive Electronics (IDE) HDDs. In technical terms, IDE refers to the connection between the hard drive and the computer. Formerly, a hard disk's controller could be found on the main circuit board of a computer or on an expansion card plugged into the main circuit board of a computer. By contrast, an ATA/IDE hard disk's controller is integrated into the HDD's assembly itself. IDE is also used to distinguish the ATA/IDE class of HDDs from the HDDs that preceded them.
The role of the controller is to manage the transfer of information from one part of a computer system to another part of the system. By relocating the controller, an ATA/IDE HDD can now be described as self-governing. Now, a controller that is integrated into the UATA drive manages data transfer instead of the controller found on the computer system to which it was attached. This in turn was seen to reduce compatibility issues between data transfer methods of hard drives and computer systems. In UATA hard drives, AT refers to the use of IDE/ATA drives.
The U, or Ultra, indicates that a particular ATA/IDE HDD uses a method of data transfer called Ultra direct memory access (DMA), or UDMA for short. UDMA appeared first in 1998 and, at its fastest, it was twice as fast at transferring data at 33/MegaBits per second (MB/s) than DMA. DMA was a step forward in data transfer methods in that it achieved higher transfer rates by avoiding the Central Processing Unit and communicating directly with the a computer’s memory for data transfer tasks. UATA hard disk drives that currently use the UDMA data transfer methods based on a technique called bus mastering can transfer data at a rate of 133 MB/s. This is a relatively new technology that allows the computer to handle more than one task at a time without affecting the speed or outcome of each task.
《What is UATA?》相关文章
- › What is Soldermask? 什么是绿油
- › What is eSATA?
- › What Is a Data Bus?
- › What is an SCSI Hard Drive?
- › What is UATA?
- › What Is a Portable Hard Drive?
- 在百度中搜索相关文章:What is UATA?
- 在谷歌中搜索相关文章:What is UATA?
- 在soso中搜索相关文章:What is UATA?
- 在搜狗中搜索相关文章:What is UATA?
编辑推荐
- · 什么是系统仿真
- · 什么是CPCI
- · 英特尔 Parallel Composer入门
- · 什么是支持数据库,什么是中宏数据库
- · 什么是数据交换技术
- · 什么是内部数据传输率
- · 什么是空间数据交换中心
- · 什么是差异备份
- · 什么是备份集
- · 什么是映像备份
- · IGBT模块
- · 什么是24脉波整流变压器
- · 自动变速器不能强制降挡故障原因、诊断与排
- · 什么是MD机
- · 中心频率,什么是中心频率
- · 功率单位mw和dbm的换算表
- · 中值滤波模块设计思路
- · 反馈振荡器的原理
- · 气体激光器简介
- · 数制与进位记数法